Valves

Pressure gauge to check the pressure of the boat, suitable for all our types of valves, both Ceredi and Lucisano.
Adjust the internal screw according to the valve type.

Realized for using on inflatable boats and for safety structures. Very compact diameter and suitable for every kind of inflatable.It is the safest way to give protection to the inflatable structure from excessive inflation. Available in different settings as following table. Further settings on specific requests. For inflatable life-rafts the valve is supplied with safety plug. Fabric’s hole mm 35.

The original push-push valve is ideal for inflatable boats in which large air fluxes are needed and where more space is available under the fabric.
The valve requires 53 mm under the fabric.

Stainless key for assembling all our inflating and overpressure valves. Fitted for using of the dynamometrical key. We suggest to use it for a correct assembly of all our valves.

NOTE: Each colour corresponds to a setting pressure. The body valve is in grey colour and the safety cup is in red colour.

It is much shorter than previous version. It is ideal for kayaks and smaller inflatable boats where less space is availa ble under the fabric. In spite of its reduced dimension, the protective cage (often absent in small valves) makes it as a strong as the larger model.
The valve requires 38 mm under the fabric.

The new pressure relief valve has to be inserted between the inflatable boat and the air source , inflator , electric inflator or air-compressor. When overtaking the best pressure the valve releases the surplus air . It replaces the pressure-gauce.
When the inflatable boat is too inflated , through inserting the pressure relief valve into the inflation/deflation valve , the surplus air will be released leading the inflatable boat at its best pressure .
It could be fit to all inflators and to the main valves that are in the market.
maximum pressure opening / minimum pressure of closing

High-pressure valve:ideal as a floor valve in inflatable boats. It has the same mechanical and structural characteristics as SRSV200.
The valve requires 38 mm under the fabric.

With a further improvement in design, the cap strap is now positioned inside the body of the valve. This new valve is ideal for kayaks and smaller inflatable boats, where a ccumbersome valve would be inappropriate. This valve has the same mechanical and structural characteristics as the rest of the range and the protective cage (often absent in small valves) makes it just as strong as the larger model. The valve requires 38 mm under the fabric.

Useful for assembly all our valves.

High-pressure valve. With a further improvement in design, the cap strap is now positioned inside the body of the valve. Ideal as a floor valve in inflatable boats. This valve has the same mechanical and structural characteristics as the rest of the range and the protective cage (often absent in small valves) makes it just as strong as the larger model. The valve requires 38 mm under the fabric.

Pressure gauge to check the pressure of the boat, suitable for all our types of valves, both Ceredi and Lucisano.
Adjust the internal screw according to the valve type.

New inflation-deflation valve: height and diameter are very compact and refined. “Newton” valve is suitable for every inflatable boats. It well rounds off also in a small diameter tubolar. The cage is closed on the bottom. All the valves of own production have silycon airtight rings. Hole’s fabric Ø mm 35.

It is our valve 6116 with cage closed on the bottom.

A new valve with modern and compact design. It combines very well also on inflatable boats of small diameter. As all our valves it has silicon airtight rings.
Hole on the fabric dm mm35.

It is our valve 6116 with cage completely closed.

Manufactured in anodized aluminium with twisting button.